Sliding gates have grown to be more popular then ever, especially on sites and then there is fixed space for swing gates to use freely where higher security is essential. Often, sliding gates form one a part of an integrated perimeter system which includes fencing and other security measures including access control and electronic surveillance.

There’s a growing preference for automated gates, chosen for his or her efficiency and simplicity of handling along with their versatility: today, electric sliding gates are widely specified for residential, education, transport, military, commercial, warehousing, public utility and high-risk sites.

Specifying sliding gates is a multifaceted process and specifiers need to look at the characteristics of these two most frequent kinds of sliding gate: tracked and cantilever.

The options AND BENEFITS OF TRACKED SLIDING GATES

Tracked sliding gates run along a set track, on which almost all of the gate’s weight is sustained wheels. The track is installed over the opening, running on the lower gate, along with the gate itself typically features automated operation. Tracked sliding gates could be of single, paired-leaf or telescopic design.

1. SPACE EFFICIENT

A key benefit for tracked sliding gates is because they are space-efficient and ideal for sites where there has limitations space beyond the gate. They’re suited to high as well as gate designs and can span very wide openings. They could have a very lower profile through the ground too.

2. ROBUST DESIGN

Tracked sliding gates provide strong security because they are difficult to force open and the few vulnerable points of these structure are hard gain access to. This can robust design, these are extremely reliable in adverse climate conditions, including high wind.

3. MORE MAINTENANCE

Tracked sliding gates are mechanically simpler than cantilever sliding gates, however, specifiers should take into account that tracked sliding gates need a more impressive range of maintenance. To ensure the gate to be effective in addition to it ought to, the track should be well maintained, regularly cleaned and clear from debris. Also, they are unsuitable for sites with uneven ground.

The functions AND BENEFITS OF CANTILEVER SLIDING GATES

A cantilever sliding gate design is counterbalanced and so doesn’t need a track to operate down the opening. Such a gate is supported on post-mounted rollers that slide inside a tubular track suited to the base of the gate. Guide rollers at the very top also enable movement with the gate. This gate design may be of single- or paired-leaf design to span. Small cantilever gates are for sale for pedestrian access where vehicular entry isn’t required.

1. Suitable for UNEVEN GROUND

As a result of lack of a track in the earth, cantilever gates are ideal for places where the gates span uneven ground, or where the ground slopes upwards behind the gate opening. With regards to space efficiency, a drawback to cantilever sliding gates is the overall length of the gate will be higher than the gap it would span in your site; this allows for your counterbalance for the trailing end of the gate.

2. Much better to INSTALL

These gates require much less time to set up, since no groundwork is needed for laying a track.

3. LESS MAINTENANCE

Additionally they demand lighter maintenance because there is you should not keep your area within the gate away from debris. Cantilever gates tend to be less expensive tracked sliding gates and they have a quieter operation.

More info about cong xep go to our new resource