• Barrera Case posted an update 1 year, 9 months ago

    Our panel coolers for electrical cabinets are an easy, reliable and affordable way to cool or climatize any type of enclosures and panels. Supreme Air Electrical Panel Cooler uses compressed air to create hot and cold air streams. The coolers require only compressed air to work, so there is no need for harmful refrigerants and freon gas. They offer the ideal solution to cooling many types of enclosures and electrical cabinets with large cooling capacities up to 7200 BTUs.

    What is the purpose of a Cabinet Cooler?

    The cooler mounts vertically on top of the cabinet through a standard knockout hole. The cooler comes with a locking ring that locks it in place.

    A compressed air line hooks up to the cooler by threading a 1/4 NPT fitting to the air inlet.

    As compressed air enters the cooler, the integrated vortex tube separates the air into hot and cold air streams.

    The vortex tube’s hot steam is emitted into the atmosphere through a muffler, which produces low levels of noise.

    Through an outlet tube at the bottom, cold air is drawn into the cabinet.

    The cold stream entering the electrical cabinet causes the hot air inside to rise, which is then purged through the cooler.

    We also offer an optional cold air distribution kit which connects to the cooler’s outlet tube and allows the user to direct the cold stream to specific hot spots within the cabinet. All Supreme Air Products electrical panel coolers are made from stainless steel, which ensures durability.

    Specifications for Cabinet Coolers

    Mounting:

    Supreme Air Products(tm) Cabinet Cooler must be vertically mounted on a flat surface for all enclosure types. A 1-1/8″ diameter hole or electrical knockout can be used to mount an electrical cabinet cooler unit. The locking ring holds it in place. For those coolers that cannot be mounted on top of cabinets due to height restrictions, we offer side mount kits.

    Humidity:

    It is important to close off any openings and vents that may bring in ambient air, especially in warm, hot, or highly humid environments. The relative humidity inside the enclosure stabilizes at 45% for all continuously operating Cabinet Coolers

    Filtration:

    All lines that supply power to the Cabinet Cooler should be run through clean, filtered air. We recommend a 5 micron auto drain filter. To prevent accidental water from entering the enclosure, it is important to filter properly. Use an oil filter that has a minimum of 0.3 micron rating if oil is found in compressed air.

    Environmental Considerations

    NEMA 4/4X (IP56) – Designed for Electrical Control Panels – Splash resistant, oil-tight, and dust-proof for use in wash down environments as well as outdoor use. For long-lasting use in wet environments, coolers are made of Type 304 Stainless Steel.

    NEMA 12 (IP52) – Cabinet Coolers (oil-tight, dust-proof) are used in industrial environments where no liquids can come into contact with the unit. To withstand extreme corrosive environments, coolers are made of Type 304 Stainless Steel.

    Check out about electrical panel cooler explore our new webpage