• Barrera Case posted an update 2 weeks, 6 days ago

    Our panel coolers for electrical cabinets are an easy, reliable and affordable way to cool or climatize any type of enclosures and panels. Supreme Air Electrical Panel Cooler uses compressed air to create hot and cold air streams. The coolers require only compressed air to work, so there is no need for harmful refrigerants and freon gas. With large cooling capacities of up to 7200 BTUs, they provide the perfect solution for quick and effective cooling in numerous types of electrical cabinets and enclosures.

    What is the purpose of a Cabinet Cooler?

    Through a standard knockout hole, the cooler is mounted vertically to the top of a cabinet. A locking ring provided with the cooler locks it into place.

    The compressor air line connects to the cooler via a 1/4 NPT fitting.

    The integrated vortex tube separates compressed air as it enters the cooler.

    The hot stream from the vortex tube is exhausted into the atmosphere by passing through a muffler which ensures low noise levels.

    Through an outlet tube at the bottom, cold air is drawn into the cabinet.

    As the cold stream enters the electrical cabinet, the hot air within the cabinet starts to rise and is gradually purged through the cooler.

    We also offer an optional cold air distribution kit which connects to the cooler’s outlet tube and allows the user to direct the cold stream to specific hot spots within the cabinet. All Supreme Air Products electrical panel coolers are made from stainless steel, which ensures durability.

    Specifications for Cabinet Coolers

    Mounting:

    Supreme Air Products(tm), Cabinet Cooler must always be mounted vertically on a flat surface. An electrical cabinet cooler unit is easy to install through a 1-1/8” diameter drilled hole or an electrical knockout and is held in place by a locking ring. We offer additional side mount kits for instances where coolers cannot be mounted on the top of the cabinet due to height restrictions.

    Humidity:

    It is crucial to seal off all openings and vents that could allow in ambient air, particularly in hot or humid environments. Cabinet Coolers that are continuously in operation maintain a relative humidity of 45%.

    Filtration:

    Clean filtered air should be used on all lines that power the Cabinet Cooler. A 5 micron auto drain filter is recommended. Proper filtration is imperative to prevent any accidental water flow into the enclosure. If oil is present in the compressed air supply, use an oil filter with a minimum 0.3 micron rating.

    Environmental Considerations

    NEMA 4/4X IP56 – Designed to be used in Electrical Control Panels. It is splash-resistant, oil-tight and dust-proof, making it suitable for outdoor as well as indoor use. Coolers are constructed of Stainless Steel (Type 304) for longevity in wet environments.

    NEMA 12 (IP52) – Cabinet Coolers (oil-tight, dust-proof) are used in industrial environments where no liquids can come into contact with the unit. Coolers are constructed of Stainless Steel (Type 304) to withstand harsh corrosive environments.

    Check out about panel cooler see this website: click for more info